40 2.3.2 3-Port Analogue CO Line and 8-Port Hybrid Extension Card (KX-TE82483) Installing KX-TE82483 to KX-TES824; 42 2.3.3 2-Port Analogue CO Line and 8-Port SLT Extension Card (KX-TE82480) Installing KX-TE82480 to KX-TES824; 45 Installing KX-TE82480 to KX-TEM824; 47 2.3.4 8-Port SLT Extension Card (KX-TE82474) Installing KX-TE82474 to KX-TES824. This CD-ROM contains the following documentation for the Advanced Hybrid System, KX-TES824/KX-TEM824: Except for copyright restrictions mentioned elsewhere on this CD-ROM, you may freely use this documentation to set up and operate this system.
Download
90 pages, 2.95 Mb Success! {{ $ctrl.successMessage }}
0'>Errors!
Panasonic Kx-tes824 Programming Manual Download
>
82Installation Manual
4.1 Troubleshooting4.1.1 Installation
•Extension telephone does
•Faulty connection
telephone.
extension port using a short telephone
If the telephone functions, then the
telephone must be repaired.
•Faulty telephone.•Plug the telephone into a known
does not function, replace the telephone.
relay is connected.
Set the A-A1 relay switch of the telephone
•Faulty extension card.•Exchange the card for a known functioning
•Proprietary telephones
extension jacks do not
telephones (SLTs) do.
extension jacks may have
•Turn the Power Switch to the 'OFF'
Power Switch to the 'ON' position.
external pager
•If using an amplifier, noise
through the cable
the amplifier or
•Use a shielded cable to connect the PBX
cable will introduce less noise.
Background Music) is
•Audio level from the output
high.
audio source by using the volume control
•Speed Dialling or One-
function.
•Incorrect programming.•Store the outside (CO) line access number
beginning of the telephone number.
than the above.
position, and then back to the 'ON'
Download 90 pages, 2.95 Mb Success! {{ $ctrl.successMessage }}
Panasonic Kx Tem824 Programming Manual Download
0'>Errors!
>
86Installation Manual
4.1.5System Reset with System Data ClearWhen the PBX does not operate correctly after restarting, you can clear the programming data stored
in the PBX. The PBX will restart with the default settings.
1. Make sure that all outside (CO) lines you use are connected to the PBX.
2. Slide the System Clear Switch to the 'CLR' position.
3. Press the Reset Button, and then return System Clear Switch to the 'N OR' position before the
power indicator stops flashing. (The power indicator will flash for about 5 seconds.)
Before touching the System Clear Switch and Reset Button, put on an eart hing strap.
•After pressing the Reset Button, make sure to return the System Clear Switch to the 'NOR'
position before the power indicator stops flashing, otherwise the system data will not be
Panasonic Kx Tes824 Pc Programming Manual
•The recorded OGMs for DISA, UCD, and Built-in Voice Message are not cleared by the
NOR/CLRRESET